A compact swr analyser and wspr generator using ad8307, atmega328 and dds and a nokia 5110 lcd

Here is a log of my experience in building and boxing a  simple VSWR analyzer. The idea is to make it small, and confined to a box (so that the components are saved from my frequent tinkering and impulses) and to cram maximum things in a small box.

If you want to build immediately, please go to my completed (old) project with source here . This one is still going on and at an extremely slow pace. But I thought of sharing the history of a small project to help out with others who are doing it from scratch. Theses are minor things which many of you already know and can skip this article if you are a regular home-brewer.

A simple swr analyser and wspr signal generator using ad8307, ad9850 and AVR

A short overview of the features

• Small form factor and use inexpensive and widely available enclosure, modules, parts etc
• Use a simple LCD (Nokia 5110) to plot the SWR for HF bands and use the DDS as a standalone signal generator, beacon generator, SWR generator and possible keyer for CW
• Replace the diode + opamp detector in my previous project with a logarithmic detector (ad8307)
• Make a simple PCB for easy build and some SMD components to save space and better performance
• Try my homemade PCB for fun (a lot of time used ..)
• Learn the struggle with eagle and cad software and trouble with encasing a project

Inside peep

Inside view of the analyzer 

A few random pictures from various stages and explanations

Design

The design is pretty simple. The idea is to make three modules or subsections

•  DDS generator (ad9850)
• A logarithmic detector (ad8307)
• A simple resistive bridge 
• A Nokia LCD for display
• A Bluetooth serial module for wireless/remote use

Details of most of these components and sections can be read in some of my old posts

Make a simple PCB (around 5cm X 9cm)

This was fun (more on this here) But at the end of the game, i realized that I forgot to mirror the atmega328 and BNC connector! 

So much frustration but solved by bending all the 28 pins (yes!!) of atmega328pu carefully and upside down. BNC socket was moved from a PCB mount one to box mounted.  But a good learning point and was ok for home etching. If I send to fab, would have been a loss of 10 PCB

Layout and pcb for proto

And here is the trace

Layout with errors

And some mounted pictures and post assembly with dirty hacks

Assembled

1

shield

log detector

casing

and

program test and boot load

refer

ATMEGA pinouts for reference

OBS!!

1) I forgot to accommodate a solution for power/battery (ended up using a small power bank)
2) Need some more space for a second detector and may be some extra switching for signals (now it is with jumpers)
3) Add wire mesh to the plastic box
4) Write it a bit more cleaner.. (sorry about it, a lot of other stuff cramming up)
5) A dds buffer with bipolar transistor and 5 volt is a pain, and i got better result by removing/bypassing it from the circuit. At 5v, the buffer was spoiling the signals

More details will be updated soon. 

Thanks for the read

Preliminary code is shown below:

#include < avr / eeprom.h > 
#include "U8glib.h"
#include < AH_AD9850.h > 
#include < Rotary.h > 
#include < OneButton.h >

U8GLIB_PCD8544 u8g(13, 11, 6, 10, 5); //SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
AH_AD9850 AD9850(A3, A5, 4, A4); //AH_AD9850(int CLK, int FQUP, int BitData, int RESET);
Rotary r = Rotary(2, 3);
OneButton button(A1, true);

float bandSwr[7];
float freqBand[7] = {
   3650000.0,
   7100000.0,
   10125000.0,
   14175000.0,
   18118000.0,
   21225000.0,
   28850000.0
};

const byte lcdW = 84;
const byte lcdH = 48;
const byte fontWidth = 5;
const byte fontHeigth = 8;
const byte totSpan = 9;

byte SWR[lcdW];
float minSwr;
float maxSwr;

uint32_t next_state_sweep = 0;
byte select_display = 0;
byte menu_redraw_required = 0;
byte doubleClicked = 0;
byte modSpan = 0;
byte posInput = 0;
byte sign = 0; // negative

float spanValue[totSpan] = {
   25000.0,
   50000.0,
   100000.0,
   250000.0,
   500000.0,
   1000000.0,
   2500000.0,
   5000000.0,
   10000000.0
};

struct settings_t {
   int spanIdx;
   float freqCenter;
}
settings;

//from radians to degrees
const float R2d = 57.296;
//Standard characteristic impedance
const float Z0 = 50.0;
float Angle;
float Mag;

float Ximp;
float Rimp;
float Zimpl;

float Swr;

void Docalcswr() {
   Swr = analogRead(A0);
   Serial.println((1023 - Swr) / 10.0);
}

void calcParameters(int k, float stepSpan) {

   float freq;
   float tempSwr;

   freq = settings.freqCenter + (k - lcdW / 2) * stepSpan;
   if (freq <= 0) freq = 1000000.0;
   AD9850.set_frequency(freq);
   Serial.print(freq / 1000000.0);
   Serial.print(" ");
   delay(10);
   Docalcswr();
   Swr = 48 * Swr / 1023.0;
   SWR[k] = Swr; // 8+(46 - round(23*(tempSwr - 1)));  //MAX SWR = 3.0
}
void printReverse(u8g_uint_t x, u8g_uint_t y,
   const char * s) {

   u8g_uint_t w = u8g.getStrWidth(s);
   u8g.drawBox(x, y - 7, w, 9); // draw cursor bar
   u8g.setDefaultBackgroundColor();
   u8g.drawStr(x, y, s);
   u8g.setDefaultForegroundColor();
}

void creaGrid() {

   u8g_uint_t p0 = lcdH - 2;

   for (int i = 1; i < 2; i++) {
      u8g.drawHLine(0, (i * 24) + fontHeigth, lcdW - 1);
   }

   for (int i = 0; i < 9; i++) {
      u8g.drawVLine(42 + (i - 4) * 10.5, fontHeigth, 46);
   }
   u8g.drawCircle(42, 49 + fontHeigth, 2);

   if (settings.freqCenter > 9999999) u8g.setPrintPos(30, p0);
   else u8g.setPrintPos(35, p0);
   u8g.print(settings.freqCenter / 1000000, 3);

   if (spanValue[settings.spanIdx] > 9999999) u8g.setPrintPos(60, 30);
   else u8g.setPrintPos(60, 30);
   u8g.print(spanValue[settings.spanIdx] / 1000000, 3);

   u8g.drawRFrame(0, fontHeigth, lcdW, 46, 1);

   u8g.drawStr(0, fontHeigth - 1, "SWR");

   u8g.setPrintPos(40, fontHeigth - 1);
   u8g.print(minSwr, 2);

   u8g.setPrintPos(80, fontHeigth - 1);
   u8g.print(maxSwr, 2);

   if (!modSpan) {
      printReverse(0, p0, "freq");
      u8g.drawStr(60, p0, "span");
   } else {
      u8g.drawStr(0, p0, "freq");
      printReverse(70, p0, "span");
   }

}

void printSwr() {
   for (int k = 0; k < lcdW - 1; k++) {
      u8g.drawLine(k, SWR[k], k + 1, SWR[k + 1]);
      //  u8g.drawCircle(k,Z[k], 1, U8G_DRAW_ALL) ;
   }
}
void swrFrame(u8g_uint_t pos, float swrVal) {
   u8g.drawBox(50, pos, 77 * ((min(swrVal, 2.5) - 1.0) / 1.5), 6);
   u8g.drawFrame(50, pos, 77, 6);
   u8g.drawVLine(76, pos, 5);
   u8g.drawVLine(102, pos, 5);
}

void creaBand() {
   u8g.setPrintPos(76, 7);
   u8g.print(1.5, 1);

   u8g.setPrintPos(102, 7);
   u8g.print(2.0, 1);

   for (int i = 0; i < 7; i++) {
      u8g_uint_t pos = (8 * i) + 10;
      u8g.setPrintPos(0, pos + 5);
      u8g.print(freqBand[i] / 1000000, 3);
      swrFrame(pos, bandSwr[i]);
   }
}

uint8_t update_graph_band(void) {
   if (next_state_sweep < 7) {
      AD9850.set_frequency(freqBand[next_state_sweep]);
      delay(10);
      Docalcswr();
      bandSwr[next_state_sweep] = Swr;
      next_state_sweep++;
      return 0;
   } else {
      next_state_sweep = 0;
      return 1;
   }
}

uint8_t update_graph(void) {
   if (next_state_sweep < lcdW) {
      if (next_state_sweep == 0) {
         minSwr = 10.0;
         maxSwr = 1.0;
      }
      float s = spanValue[settings.spanIdx] / lcdW;
      calcParameters(next_state_sweep, s);
      next_state_sweep++;
      return 0;
   } else {
      next_state_sweep = 0;
      return 1;
   }
}

// update graphics, will return none-zero if an update is required
uint8_t update_graphics(void) {

   switch (select_display) {
   case 1:
      return update_graph_band();
      break;
   default:
      return update_graph();
   }
   // no update for the graphics required
   return 0;
}

void showCursor(u8g_uint_t x0, u8g_uint_t y0) {
   u8g.drawBox(x0 + fontWidth * (7 - posInput), y0, 6, 3);
}

float updateFreq(unsigned char r, float v) {
   float step = round(pow(10, posInput));
   if (r == DIR_NONE) {
      // do nothing
   } else if (r == DIR_CW) {
      v = v + step;
   } else if ((r == DIR_CCW) && (v >= step + 1000000.0)) {
      v = v - step;
   }
   return v;
}
void updateSpan(unsigned char r) {
   if (r == DIR_NONE) {
      // do nothing
   } else if (r == DIR_CW) {
      settings.spanIdx++;
   } else if (r == DIR_CCW) {
      settings.spanIdx--;
      if (settings.spanIdx < 0) settings.spanIdx = totSpan - 1;
   }
   settings.spanIdx = settings.spanIdx % totSpan;
}
//================================================================
// overall draw procedure for u8glib

void draw(void) {
   u8g.setDefaultForegroundColor();
   switch (select_display) {
   case 1:
      creaBand();
      break;
   default:
      {
         creaGrid();
         printSwr();
         if (doubleClicked == 1) {
            switch (modSpan) {
            case 0:
               {
                  if (posInput < 3) posInput = 3;showCursor(35, lcdH - 1);
                  break;
               }
            case 1:
               {
                  posInput = 6;
                  showCursor(91, lcdH - 1);
                  break;
               }
            default:
               break;
            }

         }
      }
   }

}

//================================================================
// Arduino setup and loop

void setup(void) {
   analogReference(EXTERNAL);
   // initialize serial communication at 9600 bits per second:
   Serial.begin(9600);
   //analogReference(EXTERNAL);
   PCICR |= (1 << PCIE2);
   PCMSK2 |= (1 << PCINT18) | (1 << PCINT19);

   sei();

   // link the doubleclick function to be called on a doubleclick event.   
   button.attachDoubleClick(doubleclick);
   button.attachClick(singleclick);
   button.attachPress(longclick);

   u8g.setFont(u8g_font_5x7);

   eeprom_read_block((void * ) & settings, (void * ) 0, sizeof(settings));
   settings.spanIdx = settings.spanIdx % totSpan;
   if (settings.freqCenter <= 0) {
      settings.freqCenter = 7000000.0;
   }
   settings.spanIdx = 0;
   settings.freqCenter = 7000000.0;
   AD9850.reset(); //reset module
   delay(1000);
   AD9850.powerDown(); //set signal output to LOW

   AD9850.set_frequency(0, 0, settings.freqCenter);
}

void loop() {
   button.tick();
   if (update_graphics() != 0 | menu_redraw_required != 0) {
      u8g.firstPage();
      do {
         draw();
      } while (u8g.nextPage());
      menu_redraw_required = 0; // menu updated, reset redraw flag
   }
}

ISR(PCINT2_vect) {
   unsigned char result = r.process();
   if (doubleClicked) {
      if ((select_display == 0) && modSpan) {
         updateSpan(result);
      } else
         settings.freqCenter = updateFreq(result, settings.freqCenter);
   } else if (select_display == 0) modSpan = !modSpan;

   menu_redraw_required = 1;
}

void singleclick() { //change position in field
   if (doubleClicked) {
      posInput++;
      posInput = posInput % 7;
   }
   menu_redraw_required = 1;
}

void doubleclick() { //change field
   doubleClicked = !doubleClicked;
   if (!doubleClicked) eeprom_write_block((const void * ) & settings, (void * ) 0, sizeof(settings));;
   menu_redraw_required = 1;
}
void longclick() { //rotate displays
   select_display = select_display++;
   select_display = select_display % 3;
   posInput = 0;
   doubleClicked = 0;
   eeprom_write_block((const void * ) & settings, (void * ) 0, sizeof(settings));
   menu_redraw_required = 1;
}